|
How to build a Model Railroad!
From the "All Gauge Model Railroading" site, an amazing resource!
How to Change a Tire
Step 1: Pry off the wheel cover with the wrench and loosen the wheel nuts.
Step 2: Put the jack under the car.
Step 3: Use the wrench to jack the car until the wheel is about three inches off the ground.
Step 4: Remove the nuts,
mount the spare, and thread the nuts back on by hand.
Step 5: Lower the car, remove the jack, and then use the wrench
to fully tighten the wheel nuts.
|
